Mailing List (by thread)

• Date Index

• Default convergence test used in PETSc, Stephen R Ball
  • Re: Default convergence test used in PETSc,  Matthew Knepley  2008/04/03
• Re: Non repeatability issue,  Barry Smith  2008/04/04
• Installation with Intel or PGI compilers, amjad ali
  • Re: Installation with Intel or PGI compilers,  Satish Balay  2008/04/07
  • Re: Installation with Intel or PGI compilers,  Nicolas Tardieu  2008/04/07
    • Re: Installation with Intel or PGI compilers,  Satish Balay  2008/04/07
• Stalling once linear system becomes a certain size, David Knezevic
  • Re: Stalling once linear system becomes a certain size,  Satish Balay  2008/04/07
    • Re: Stalling once linear system becomes a certain size,  Matthew Knepley  2008/04/07
      • Re: Stalling once linear system becomes a certain size,  Satish Balay  2008/04/07
• error in creating 3d DA, Randall Mackie
  • Re: error in creating 3d DA,  Matthew Knepley  2008/04/07
• MatTranspose, Toby D. Young
  • Re: MatTranspose,  Matthew Knepley  2008/04/08
    • Re: MatTranspose,  Satish Balay  2008/04/08
    • Re: MatTranspose,  Toby D. Young  2008/04/08
• Further question about PC with Jaocbi Row Sum, Shi Jin
  • Re: Further question about PC with Jaocbi Row Sum,  Barry Smith  2008/04/08
  • <Possible follow-ups>
  • Re: Further question about PC with Jaocbi Row Sum,  Shi Jin  2008/04/09
    • Re: Further question about PC with Jaocbi Row Sum,  Matthew Knepley  2008/04/09
  • Re: Further question about PC with Jaocbi Row Sum,  Shi Jin  2008/04/10
    • Re: Further question about PC with Jaocbi Row Sum,  Hong Zhang  2008/04/10
    • Re: Further question about PC with Jaocbi Row Sum,  Barry Smith  2008/04/10
  • Re: Further question about PC with Jaocbi Row Sum,  Shi Jin  2008/04/11
    • Re: Further question about PC with Jaocbi Row Sum,  Barry Smith  2008/04/11
    • Re: Further question about PC with Jaocbi Row Sum,  Matthew Knepley  2008/04/11
    • Re: Further question about PC with Jaocbi Row Sum,  Hong Zhang  2008/04/11
  • Re: Further question about PC with Jaocbi Row Sum,  Shi Jin  2008/04/11
• about MatMatMultTranspose_seqdense_seqdense(), Yujie
  • Re: about MatMatMultTranspose_seqdense_seqdense(),  Shao-Ching Huang  2008/04/09
  • Re: about MatMatMultTranspose_seqdense_seqdense(),  Barry Smith  2008/04/09
• DA question, Amit . Itagi
  • Re: DA question,  Berend van Wachem  2008/04/09
    • Re: DA question,  Amit . Itagi  2008/04/09
      • Re: DA question,  Randall Mackie  2008/04/09
      • Re: DA question,  Amit . Itagi  2008/04/09
      • Re: DA question,  Sean Dettrick  2008/04/09
      • Re: DA question,  Randall Mackie  2008/04/09
      • Re: DA question,  Amit . Itagi  2008/04/10
      • Re: DA question,  Amit . Itagi  2008/04/29
      • Re: DA question,  Matthew Knepley  2008/04/29
      • Re: DA question,  Amit . Itagi  2008/04/29
      • Re: DA question,  Barry Smith  2008/04/29
      • Re: DA question,  Amit . Itagi  2008/04/29
      • Re: DA question,  Matthew Knepley  2008/04/29
      • Re: DA question,  Barry Smith  2008/04/29
      • Re: DA question,  Amit . Itagi  2008/04/30
      • Re: DA question,  Barry Smith  2008/04/30
      • Re: DA question,  Amit . Itagi  2008/04/30
      • Re: DA question,  Barry Smith  2008/04/30
  • Re: DA question,  Matthew Knepley  2008/04/09
• Forming a sparse approximation of a MatShell, Jed Brown
  • Re: Forming a sparse approximation of a MatShell,  Barry Smith  2008/04/09
    • Re: Forming a sparse approximation of a MatShell,  Jed Brown  2008/04/09
• Question on DA, Ningyu Liu
  • Re: Question on DA,  Barry Smith  2008/04/11
• how to create sequential Vec or Mat in parallel mode., Yujie
  • Re: how to create sequential Vec or Mat in parallel mode.,  Matthew Knepley  2008/04/12
    • Re: how to create sequential Vec or Mat in parallel mode.,  Yujie  2008/04/12
• Slow speed after changing from serial to parallel, Ben Tay
  • Re: Slow speed after changing from serial to parallel,  Matthew Knepley  2008/04/13
    • Re: Slow speed after changing from serial to parallel,  Ben Tay  2008/04/14
      • Re: Slow speed after changing from serial to parallel,  Matthew Knepley  2008/04/14
      • Re: Slow speed after changing from serial to parallel,  Ben Tay  2008/04/14
      • Re: Slow speed after changing from serial to parallel,  Matthew Knepley  2008/04/14
      • Re: Slow speed after changing from serial to parallel,  Ben Tay  2008/04/15
      • Re: Slow speed after changing from serial to parallel,  Matthew Knepley  2008/04/15
      • Re: Slow speed after changing from serial to parallel,  Ben Tay  2008/04/15
      • Re: Slow speed after changing from serial to parallel,  Barry Smith  2008/04/15
      • Re: Slow speed after changing from serial to parallel,  Ben Tay  2008/04/15
      • Re: Slow speed after changing from serial to parallel,  Matthew Knepley  2008/04/15
      • Re: Slow speed after changing from serial to parallel,  Ben Tay  2008/04/15
      • Re: Slow speed after changing from serial to parallel (with ex2f.F),  Ben Tay  2008/04/15
      • Re: Slow speed after changing from serial to parallel (with ex2f.F),  Matthew Knepley  2008/04/15
      • Re: Slow speed after changing from serial to parallel (with ex2f.F),  Ben Tay  2008/04/15
      • Re: Slow speed after changing from serial to parallel (with ex2f.F),  Matthew Knepley  2008/04/15
      • Re: Slow speed after changing from serial to parallel (with ex2f.F),  Satish Balay  2008/04/15
      • Re: Slow speed after changing from serial to parallel (with ex2f.F),  Ben Tay  2008/04/15
      • Re: Slow speed after changing from serial to parallel (with ex2f.F),  Satish Balay  2008/04/16
      • Re: Slow speed after changing from serial to parallel (with ex2f.F),  Ben Tay  2008/04/16
      • Re: Slow speed after changing from serial to parallel (with ex2f.F),  Matthew Knepley  2008/04/16
      • Re: Slow speed after changing from serial to parallel (with ex2f.F),  Barry Smith  2008/04/16
      • Re: Slow speed after changing from serial to parallel (with ex2f.F),  Sanjay Govindjee  2008/04/16
      • Re: Slow speed after changing from serial to parallel (with ex2f.F),  Ben Tay  2008/04/18
      • Re: Slow speed after changing from serial to parallel (with ex2f.F),  Satish Balay  2008/04/19
      • Re: Slow speed after changing from serial to parallel (with ex2f.F),  Ben Tay  2008/04/19
      • Re: Slow speed after changing from serial to parallel (with ex2f.F),  Satish Balay  2008/04/19
      • Re: Slow speed after changing from serial to parallel,  Ben Tay  2008/04/17
      • Re: Slow speed after changing from serial to parallel,  Satish Balay  2008/04/18
      • Re: Slow speed after changing from serial to parallel,  Barry Smith  2008/04/18
• PETSc + HYPRE, Márcio Ricardo Pivello
  • Re: PETSc + HYPRE,  Matthew Knepley  2008/04/15
    • Re: PETSc + HYPRE,  Márcio Ricardo Pivello  2008/04/15
      • Re: PETSc + HYPRE,  Matthew Knepley  2008/04/15
      • Re: PETSc + HYPRE,  Lisandro Dalcin  2008/04/15
      • Re: PETSc + HYPRE,  Márcio Ricardo Pivello  2008/04/16
      • Re: PETSc + HYPRE,  Lisandro Dalcin  2008/04/16
  • Re: PETSc + HYPRE,  Lisandro Dalcin  2008/04/15
• general question on speed using quad core Xeons, Randall Mackie
  • Re: general question on speed using quad core Xeons,  Matthew Knepley  2008/04/15
    • Re: general question on speed using quad core Xeons,  Randall Mackie  2008/04/15
      • Re: general question on speed using quad core Xeons,  Matthew Knepley  2008/04/15
      • Re: general question on speed using quad core Xeons,  Randall Mackie  2008/04/15
      • Re: general question on speed using quad core Xeons,  Matthew Knepley  2008/04/15
  • Re: general question on speed using quad core Xeons,  Barry Smith  2008/04/16
    • Re: general question on speed using quad core Xeons,  Randall Mackie  2008/04/16
    • Re: general question on speed using quad core Xeons,  Satish Balay  2008/04/16
      • Re: general question on speed using quad core Xeons,  Barry Smith  2008/04/16
      • Re: general question on speed using quad core Xeons,  Berend van Wachem  2008/04/16
      • Re: general question on speed using quad core Xeons,  Satish Balay  2008/04/16
      • Re: general question on speed using quad core Xeons,  Randall Mackie  2008/04/16
      • Re: general question on speed using quad core Xeons,  amjad ali  2008/04/21
      • Re: general question on speed using quad core Xeons,  Satish Balay  2008/04/21
      • Re: general question on speed using quad core Xeons,  amjad ali  2008/04/22
      • Re: general question on speed using quad core Xeons,  Satish Balay  2008/04/22
      • Re: [PETSC #17608] Re: general question on speed using quad core Xeons,  Satish Balay  2008/04/23
• Hypre, tribur
  • Re: Hypre,  Matthew Knepley  2008/04/17
• how to combine several matrice into one matrix, Yujie
  • Re: how to combine several matrice into one matrix,  Barry Smith  2008/04/18
    • Re: how to combine several matrice into one matrix,  Yujie  2008/04/19
• MatMatMult, Waad Subber
  • Re: MatMatMult,  Barry Smith  2008/04/20
• Schur system + MatShell, tribur
  • Re: Schur system + MatShell,  Satish Balay  2008/04/21
  • Re: Schur system + MatShell,  Barry Smith  2008/04/21
  • <Possible follow-ups>
  • Re: Schur system + MatShell,  tribur  2008/04/22
    • Re: Schur system + MatShell,  Barry Smith  2008/04/22
      • Re: Schur system + MatShell,  Matthew Knepley  2008/04/22
      • Re: Schur system + MatShell,  tribur  2008/04/22
      • Re: Schur system + MatShell,  Matthew Knepley  2008/04/22
      • Re: Schur system + MatShell,  Satish Balay  2008/04/22
  • Re: Schur system + MatShell,  tribur  2008/04/24
• flexible block matrix, Jed Brown
  • Re: flexible block matrix,  Satish Balay  2008/04/21
  • Re: flexible block matrix,  Barry Smith  2008/04/21
• Selection between C2D and Xeon 3000 for PETSc Sparse solvers, amjad ali
  • Re: Selection between C2D and Xeon 3000 for PETSc Sparse solvers,  Satish Balay  2008/04/22
• Multiple versions of PetSc, Amit . Itagi
  • Re: Multiple versions of PetSc,  Satish Balay  2008/04/22
  • Re: Multiple versions of PetSc,  Matthew Knepley  2008/04/22
    • Re: Multiple versions of PetSc,  Amit . Itagi  2008/04/22
• about MatMult(), Yujie
  • Re: about MatMult(),  Barry Smith  2008/04/22
• Multilevel solver, Amit . Itagi
  • Re: Multilevel solver,  Barry Smith  2008/04/22
    • Re: Multilevel solver,  Amit . Itagi  2008/04/23
    • Re: Multilevel solver,  Amit . Itagi  2008/04/23
      • Re: Multilevel solver,  Matthew Knepley  2008/04/23
      • Re: Multilevel solver,  Amit . Itagi  2008/04/23
      • Re: Multilevel solver,  Matthew Knepley  2008/04/23
      • Re: Multilevel solver,  Satish Balay  2008/04/23
      • Re: Multilevel solver,  Satish Balay  2008/04/23
      • Re: Multilevel solver,  Satish Balay  2008/04/23
    • Re: Multilevel solver,  Amit . Itagi  2008/04/24
      • Re: Multilevel solver,  Matthew Knepley  2008/04/24
      • Re: Multilevel solver,  Amit . Itagi  2008/04/24
      • Re: Multilevel solver,  Matthew Knepley  2008/04/24
      • Re: Multilevel solver,  Amit . Itagi  2008/04/24
      • Re: Multilevel solver,  Barry Smith  2008/04/24
  • <Possible follow-ups>
  • Re: Multilevel solver,  Amit . Itagi  2008/04/23
    • Re: Multilevel solver,  Matthew Knepley  2008/04/23
      • Re: Multilevel solver,  Satish Balay  2008/04/23
• valgrind error,  Berend van Wachem  2008/04/23
• Question on TS_EULER, Ningyu Liu
  • Re: Question on TS_EULER,  Matthew Knepley  2008/04/24
• Using PETSc libraries with MS Compute cluster and MS MPI, Ben Tay
  • Re: Using PETSc libraries with MS Compute cluster and MS MPI,  Barry Smith  2008/04/24
    • Re: Using PETSc libraries with MS Compute cluster and MS MPI,  Farshid Mossaiby  2008/04/24
• how to get the explicit matrix of the preconditioner, Yujie
  • Re: how to get the explicit matrix of the preconditioner,  Dave May  2008/04/28
    • Re: how to get the explicit matrix of the preconditioner,  Yujie  2008/04/28
      • Re: how to get the explicit matrix of the preconditioner,  Matthew Knepley  2008/04/28
• Re: Compiling PETSc with Visual Studio 2008, Farshid Mossaiby
  • Re: Compiling PETSc with Visual Studio 2008,  Matthew Knepley  2008/04/28
  • Re: Compiling PETSc with Visual Studio 2008,  Satish Balay  2008/04/28
    • Re: Compiling PETSc with Visual Studio 2008,  Satish Balay  2008/04/28
      • Re: Compiling PETSc with Visual Studio 2008,  Farshid Mossaiby  2008/04/29
• Shared libraries, Amit . Itagi
  • Re: Shared libraries,  Satish Balay  2008/04/28
• PETSC with MPI-GAMMA ??,  amjad ali  2008/04/30