Re: [AG-TECH] amplifier and xap800 software question.

[John I Quebedeaux Jr <johnq@lsu.edu>]

See below:

On Sep 26, 2005, at 2:40 PM, Pritesh Shah wrote:

> hi,
>
> i have the gentner (clearone) xap800 and i had two questions  
> pertaining to that:
>
> 1) Is anybody out there controlling gentner using a linux/unix machine
> ? Actually i want to find out if there's any way (any software)
> available through which i can control the xap800 using a unix machine.
> (instead of using g-ware software provided for windows.)
I know it is certainly possible with just a terminal application  if  
you know the commands  - which i believe are in the manual. Of course  
then all the feedback will be text based.... but yes, certainly  
possible. When troubleshooting a unit a ClearOne tech had me  
interface via terminal to test the unit and everything you can do  
this way - including seeing the meter information, etc (all in text  
of course). Might be easier to configure it (i.e. nail down the audio  
via the windows G-Ware software) and then via terminal program just  
maintain/adjust as needed....

> 2) Is there a set of recommended Amplifers that one can use with
> xap800 ? Or can anybody advice according to their own experience of
> what amplifiers would be good ??
I prefer the Genelec monitor speakers myself...

-John Q.

> Thanks in advance,
> Pritesh
--
John I. Quebedeaux, Jr.; Louisiana State University
Computer Manager LBRN; 131 Life Sciences Bldg.
e-mail: johnq@lsu.edu; web: http://lbrn.lsu.edu
phone: 225-578-0062 / fax: 225-578-2597