|
Hi, You cannot enter addresses and ports
directly. You will either need to have someone set up the venue of their
venue server, or you can run vic and rat directly. To do this, you can
either download them from http://www-mice.cs.ucl.ac.uk/multimedia/software/
or locate them in your AGTk 2.3 installation (usually in AudioProducer.zip and
VideoConsumer.zip in C:\Program Files\AGTk-2.3\NodeServices). You then just run: rat –t 127 233.2.171.xx/59244 vic –t 127 233.2.171.xx/59246 This will not work if you use unicast/Bridged. In this case, you
will need to have someone set up a bridge for you for this venue and tell you
the address/ports. Andrew J ============================================ From:
owner-ag-tech@mcs.anl.gov [mailto:owner-ag-tech@mcs.anl.gov] On Behalf Of Michael A Gideon I use inSORS for Access Grid connectivity. I usually connect to
other inSORS sites. I simply select a static venue from a list. Yesterday, I had to connect to a virtal AG venue and after a lot of
frustration, I found out I had to go to a web site that inSORS hosts and put in
the venue there. At that point I could connect with their software. So today I want to go just the opposite way. I want to initiate a
venue with inSORS and try to connect to it with AGTk. I called inSORS to
see how this would work. Their tech support told me to get the ip address
and the Audio and Video ports. So in my example the ip is 233.2.171.xx and the audio port is 59244
video is 59246 ( I think). Now I’m poking around the AG client, but
can’t find a place to enter this information. Does anyone have any
experience doing this? Thanks a bunch, Mike Gideon UNR |